Gallery Image

 

» Approvals

 

» Msds

 

 

 

 

AeroShell Fluid 41 is a mineral hydraulic oil manufactured to a very high level of cleanliness, and possesses improved fluid properties. AeroShell Fluid 41 contains additives which provide excellent low temperature fluidity as well as exceptional anti-wear, oxidation - corrosion inhibition and shear stability. In addition metal de-activators and foam inhibitors are included in this high viscosity index fluid to enhance performance in hydraulic applications. AeroShell Fluid 41 is capable of wide temperature range operation.
AeroShell Fluid 41 is dyed red.

 

 

APPLICATIONS


AeroShell Fluid 41 is intended as a hydraulic fluid in all modern aircraft applications requiring a mineral hydraulic fluid. AeroShell Fluid 41 is particularly recommended where use of a "superclean" fluid can contribute to improvements in component reliability, and can be used in aircraft systems operating unpressurised between –54°C to 90°C and pressurised between –54°C to 135°C.
AeroShell Fluid 41 should be used in systems with synthetic rubber components and must not be used in systems incorporating natural rubber.
Refer to the General Notes at the front of this section for further information. AeroShell Fluid 41 is compatible with AeroShell Fluids 4, 31, 51, 61 and 71 and SSF/LGF. Chlorinated solvents should not be used for cleaning hydraulic components which use AeroShell Fluid 41. The residual solvent contaminates the hydraulic fluid and may lead to corrosion.

 

 U.S.    –  
 British    –  
     
 French    –  
     
 Russian    –  
 NATO Code    –  
     
 Joint Service Designation    –  
Boeing    Approved BMS 3-32A (AeroShell SSF is approved to Type I and AeroShell LGF is approved to Type II)  
 McDonnell Douglas    Approved DPM-6177